| 2502-D |
25-Position Selector Panel, No Call-in circuit or LED's |
| 2510-D |
10-Position Selector Panel, No Call-in circuit or LED's |
| 2502-AN |
25-Position Selector Panel with latching call circuits & LED's |
| 2502-AN-B |
25-Position Selector Panel with non-latching LED's |
| 2510-AN |
10-Position Selector Panel With latching call circuits & LED's |
| 2510-AN-B |
10-Position Selector Panel with non-latching LED's |
| XP-1/10 |
10-Position Two-Wire Board for Pair-shielded room cables |
| XP-1/25 |
25-Position Two-Wire Board for Pair-shielded room cables |
| XP-2/10-EL |
10-Position Two-Wire Board for non-shielded paired cable |
| XP-2/25-EL |
25-Position Two-Wire Board for non-shielded paired cable |
| 25-HS-INT |
Console handset talks/listens to room speaker |
| 25-HS-TL |
Console handset talks/listens to HS-26-2 room handsets |
| 25-INT-TL |
Console handset can talk with speakers or room handsets |
| 25-TT |
Time-tone oscillator option for one circuit only |
| 25-TT/6C |
Six-circuit time-tone capability. Requires 2502-TT/6C or 2602-TT style selector panel to provide all six zones |
| 2502-TT/C,-S,-H |
Attaches to 2502 series selector panels to provide 6 circuits of time-tone signals, selectable by slide switches. -S refers to screw terminations for room cables, the -H model refers to headers that fit our standard 156F-4 cable connectors (see below) |
| 2602-AN-TL |
25-Position Pushbutton-style Selector Panel for communicating with room telephones. LED annunciators. Requires telecom option 25-HS-TL or 25-INT-TL for proper operation |
| 2500-RC |
AM/FM Cassette Receiver for Model 2500 |
| 2510-RC |
10-Position Selector Panel without Call-in. Radio/Cassette. |
| 2510-AN-RC |
10-Position Selector with LED annunciators. Radio/Cassette. |
| 260-TG |
3-Tone Warning Panel, mounted on 2-5/8"H faceplate |
| 156F-4 |
Four-position room cable connectors for selector panels |
| MRT-6 |
Hand tool for attaching room cable connectors |
| OPTION 1 |
Supervised (repeating beep-tone) privacy option |
| OPTION 3 |
Remote Page feature. Specify 600-Ohm Telco, or Lo-Z mic |
| CS-26-1 |
Single pushbutton call switch on screen-printed 1-gang plate |
| CS-26-1C |
Single pushbutton call switch with non-polar capacitor for XP-2 |
| CS-26-1 / EL |
Single pushbutton call switch with latching SCR circuit |
| 2500-1 |
Full-size Cabinet for Model 2500 (10"H x 19.5" x 13"D) |
| 2500-CB |
Add-on Piggyback Enclosure (3.8"H x 19.5"W x 13"D) |
DeltaComUSA Model 2500