Products: 2100 Series | 2500 Series | 2600 Series | 2700 Series | Clocks
Intercom Systems 2700+
|
DeltaComUSA
Model DC-2701 Intercom System
Complete basic 24-Station Intercom System
with one 27-TRM Terminal Cabinet and one HS-27-ADM Attendant's Phone.
Includes DC-2724 Termination Board, and three 25-pair cables for connecting
to the DC-2700 Master Controller. This system can be used with speakers
having 25-Volt matching transformers, or it may be used with 45 ohm speakers
directly. Station cables are connected using 4-position screw terminals.
Recommended cable for standard system (with speakers and call switches):
3-Conductor, 22 gauge, with overall shield (four conductors total), either
stranded or solid. Recommended room cable for HS-27-3 handset with speaker
is 4-conductor, 22 gauge, with overall shield (five conductors total). A
circulating pair from handset to handset may be substituted for the fifth
conductor.
Each of the 24 remote stations connected to the
basic system can draw up to one Watt of audio power. If higher output
is required for paging to certain areas, an external booster amp may
be connected to an unused station via matching circuitry, for powering
corridor speakers and external horns. If multiple time-tones, and/or
greater power at the remote stations are required, the system must be
expanded to include room relays and an external paging amplifier, plus
other control electronics.
|
|
DeltaComUSA
Model DC-2700 Intercom Controller
Master Control Unit (DC-2700) provides
24 stations with handsfree talkback, one way group call, and all call. May
be expanded in groups of 24 stations to provide 48, 72 or 96 stations with
intercom and paging. Also can distribute background music and zoned paging
to groups of 6 rooms, and single-zone class change tones (time tones).
Note: time-tone operation requires external master clock.
Remote stations are accessed by dialing a 3-digit
number, which can be programmed for any room or architectural number between
101 and 999. Calling stations may also be identified alphanumerically
by the calling party's name or other title via the caller ID display of
the attendant's phone.
Supports up to six or more administrative phones,
any of which may answer or initiate calls to room stations. Room stations
typically consist of a speaker and a call switch. Optional wall handsets
may be included instead of call switches for increased privacy during intercommunication
(requires DC27-PS & 27-TEL for operation).
With additional components, the Model 2700 can
support up to six zones of programmed bell schedules, as well as high-level
paging to outdoor horns or speakers (requires DC-2724-RY-TT termination
boards, power supply, and other equipment--see below).
The Model DC-2700 may be mounted to a flat wall
or surface with mounting brackets (included), or it can be rack-mounted
in a 19-inch EIA standard enclosure.
Dimensions: 19" H X 10-3/4" W X 3-3/8" D Wt. 16 lbs./ 120 VAC 60Hz
|
|
DeltaComUSA Model DC27-EXP Expansion Unit
For systems
requiring more than 24 stations, the DC27-EXP expansion unit adds an additional
24 stations per each unit for a maximum of 96 stations. The DC27-EXP provides
the same functionality as the DC-2700 master controller, with two-way handsfree
communication, one way all call and group page, and annunciation (room call-in)
by architectural number. Like the DC-2700, the expansion unit is rack-mountable
in a standard 19-inch panel rack, or its mounting brackets may be used to
surface-mount it to a wall or a plywood panel.
The DC27-EXP is designed to connect to the DC-2700
master intercom controller by a 25-pair Amphenol-type telephone connector
mounted on its side. The DC-2700 is provided with latches at the top and
bottom which lock the two connectors together. Additional expansion units
are attached in a similar manner, with latches at each end to secure their
connections.
Each DC27-EXP requires one DC-2724 terminal board
and cable assembly to connect field wiring to the system. An additional
terminal cabinet is required for systems with over 48 stations, to house
the terminal boards and power supply, when necessary.
Dimensions: 19" H X 8-3/4" W X 3-3/8" D Wt. 15 lbs./ Input: 120VAC
60Hz
|
|
DeltaComUSA 27-TRM Terminal Cabinet
(Shown with DC-2724-RY-TT and DC27-PS installed)
Each complete DC-2701 system
is provided with a Model 27-TRM steel terminal cabinet, giving a capacity
for up to 48 stations. The cabinet is rack-mountable in a standard 19-inch
panel rack, or its mounting brackets may be used to surface-mount it to
a wall or a plywood panel. The cabinet can hold either one or two DC-2724
terminal boards and cable assemblies, for connecting field wiring to the
system.
An additional terminal cabinet is required
for systems with over 48 stations, or to house other electronics and/or
the power supply, when necessary. Because of the many varieties of options
available with the 2700 system, the cabinet may have more or less components
installed than as pictured here. Power supply and bus terminations are
via terminal barrier strips (6-32 screws, 10 or 12 terminals), which are
labeled for external connections.
Dimensions: 19" H X 12" W X 4-3/8" D Wt. 16 lbs./Input: 120VAC 60Hz
|
|
DeltaComUSA HS-27-ADM
Administrative Handset
Each DC-2701 Intercom system includes one
HS-27-ADM administrative phone, which may answer or initiate calls to
room stations. Room stations typically consist of a wall or ceiling speaker
and a call switch. Optional wall handsets (HS-27-3) may be included instead
of call switches for increased privacy during intercommunication (requires
a minimum of one DC27-PS and one 27-TEL installed in the system for operation).
Calling room stations are identified by location number on the three-line
liquid crystal display, along with time and date.
Remote stations are accessed by dialing a 3-digit
number, which can be programmed for any room or architectural number
between 101 and 999. Calling stations may also be identified alphanumerically
by the calling party's name or other title via the caller ID display of
the attendant's phone.
The DC-2700 system supports up to six or more
administrative phones, any of which may answer or initiate calls to room
stations. Each additional phone can use full intercom and paging functions.
Dimensions: 8-1/2" L X 5" W X 3" H Weight: 2 lbs.
Uses three "AA" batteries (included).
NOT PICTURED: Model HS-27-ADM/SPKR Speakerphone model.
|
Accessories for this intercom series
| DC27-EXP
|
Expansion unit for 24 stations. Requires a DC-2724 board
|
| DC-2724-ASY
|
Basic Termination Board with two 25-pair
cables
|
| DC-2724-RY
|
Termination Board, cables, all-call relays
(high-level).
|
| DC-2724-RY-TT
|
Termination Board, cables, relays, 6-zone time-tone
ability
|
| DC27-PS
|
Transformer and power supply for -RY and -TT
series
|
| 2700-RC/MON
|
Radio-cassette, monitor amp, speaker on 2-5/8"
panel
|
| 2700-MON
|
Monitor amp, speaker for user-provided program
sources
|
| 270-TG
|
3-Tone Warning Panel, mounted on 3-1/2"H faceplate
|
| 2700-TT
|
External time-tone oscillator (on DC27-PS) |
| 2700-RY-6Z
|
6-Circuit relay bank, Misc. for high-level time-tone,
page
|
| CS-26-1
|
Single pushbutton call switch on screen-printed
1-gang plate. |
| HS-27-3
|
Room Wall handset on 2-gang SS plate
|
| 27-TEL
|
Interface module for room handsets (1 required per system)
|
| HS-27-ADM
|
Additional administrative handset (up to 6 can
be added)
|
| HS-27-ADM/SPKR
|
Speakerphone model of administrative handset
|
| 27-TRM
|
Additional terminal cabinet. Required for >48
stations
|
| P-270
|
120 Watt Program/Paging Booster Amplifier
|
|
|